Photonfocus Board Level Camera

Compact solution for application-specific systems

• Superior image quality with 3rd generation CMOS sensor from Photonfocus
• 1312 x 1082 pixel resolution
• Up to 27fps @ full resolution
• Good Near Infrared (NIR) response
• New firmware with extended set of features and functionality

• High sensitivity over wide spectral range from 320 to 1030 nm.
• High Quantum efficiency (> 50%) and fill factor (> 60%)
• High dynamic range of up to 120 dB via LinLog® Technology
• Sensor without cover glass

• Up to 12 bit grayscale resolution
• Superior signal-to-noise ratio (SNR)
• Low power consumption at high speeds
• Global shutter avoiding motion artifacts
• Very high resistance to blooming
• On camera shading correction

• 3x3 convolver for image pre-processing in the camera
• Up to 512 regions of interest (MROI) and decimation
• 2 look-up tables (12-to-8 bit) on user-defined image region (Region-LUT)
• Temperature monitoring of sensor and camera
• Crosshairs overlay on the image
• Image information and camera settings inside the image (status line)

• CameraLink® interface
• Advanced trigger input and strobe output
• Compact camera size of 46 x 46 x 45 mm
• Software (GUI + SDK) provided for setting and storage of camera parameters

 

Compact solution for application-specific systems

• Superior image quality with 3rd generation CMOS sensor from Photonfocus
• 1312 x 1082 pixel resolution
• Up to 55fps @ full resolution
• Good Near Infrared (NIR) response
• New firmware with extended set of features and functionality

• High sensitivity over wide spectral range from 320 to 1030 nm.
• High Quantum efficiency (> 50%)
• High pixel fill factor (> 60%)
• High dynamic range of up to 120 dB via LinLog® Technology
• Sensor without cover glass

• Up to 12 bit grayscale resolution
• Superior signal-to-noise ratio (SNR)
• Low power consumption at high speeds
• Global shutter avoiding image distortions, ideal for high speed applications
• Very high resistance to blooming
• On camera shading correction

• 3x3 convolver for image pre-processing in the camera
• Up to 512 regions of interest (MROI) and decimation
• 2 look-up tables (12-to-8 bit) on user-defined image region (Region-LUT)
• Temperature monitoring of sensor and camera
• Crosshairs overlay on the image
• Image information and camera settings inside the image (status line)

• CameraLink® interface
• Advanced trigger input and strobe output
• Compact camera size of 46 x 46 x 45 mm
• Software (GUI + SDK) provided for setting and storage of camera parameters

 

Compact solution for application-specific systems

• Superior image quality with 3rd generation CMOS sensor from Photonfocus
• 1312 x 1082 pixel resolution
• Up to 108 fps @ full resolution
• Good Near Infrared (NIR) response
• New firmware with extended set of features and functionality

• High sensitivity over wide spectral range from 320 to 1030 nm.
• High Quantum efficiency (> 50%)
• High pixel fill factor (> 60%)
• High dynamic range of up to 120 dB via LinLog® Technology
• Sensor without cover glass

• Up to 12 bit grayscale resolution
• Superior signal-to-noise ratio (SNR)
• Low power consumption at high speeds
• Global shutter avoiding image distortions, ideal for high speed applications
• Very high resistance to blooming
• On camera shading correction

• 3x3 convolver for image pre-processing in the camera
• Up to 512 regions of interest (MROI) and decimation
• 2 look-up tables (12-to-8 bit) on user-defined image region (Region-LUT)
• Temperature monitoring of sensor and camera
• Crosshairs overlay on the image
• Image information and camera settings inside the image (status line)

• CameraLink® interface
• Advanced trigger input and strobe output
• Compact camera size of 46 x 46 x 45 mm
• Software (GUI + SDK) provided for setting and storage of camera parameters

 

Compact solution for application-specific systems

- monochrome 1" CMOS image sensor
- 1024 x 1024 pixel (megapixel resolution)
- pixel size: 10.6 µm x 10.6 µm
- spectral range: 350 - 1000 nm

- up to 37 frames per second (fps) with full resolution
- ultra low trigger delay and trigger jitter
- advanced trigger modes

- linear sensor characteristics
- LinLog® response curve (linear-logarithmic sensor characteristics)
- camera simulator for the LinLog® response curve
- 120 dB dynamic range with LinLog®-technology
- Skimming for low light conditions

- no motion artefacts due to global shutter
- no image lag, no smear and no blooming
- configurable region of interest (ROI)
- up to 16 selectable windows (Multiple Region of Interest-MROI)
- frame rate inverse proportional to ROI
- image preprocessing with integrated look up tables (LUT)

- integrated digital reduction of fix pattern noise (FPN)
- integrated shading correction

- camera configuration with GUI software Windows OS
- API for Windows operating system
- SDK for QNX realtime operating system

- CameraLink® base interface
- frame grabber support for many manufactors
- dimensions CameraLink® camera: 46 x 46 x 39 mm³ (W x H x D)
- lens mount: C-Mount (option CS-Mount)


Applications
- Standard vision applications
- Quality control
- Process control
- Packaging inspection
- PCB inspection
- Laser welding and soldering
- Keyhole analysis
- Laser profile measurements
- Laser triangulation
- Motion analysis
- Line scan applications
 

Compact solution for application-specific systems

- monochrome 1" CMOS image sensor
- 1024 x 1024 pixel (megapixel resolution)
- pixel size: 10.6 µm x 10.6 µm
- spectral range: 350 - 1000 nm

- up to 37 frames per second (fps) with full resolution
- ultra low trigger delay and trigger jitter
- advanced trigger modes

- linear sensor characteristics
- LinLog® response curve (linear-logarithmic sensor characteristics)
- camera simulator for the LinLog® response curve
- 120 dB dynamic range with LinLog®-technology
- Skimming for low light conditions

- no motion artefacts due to global shutter
- no image lag, no smear and no blooming
- configurable region of interest (ROI)
- up to 16 selectable windows (Multiple Region of Interest-MROI)
- frame rate inverse proportional to ROI
- image preprocessing with integrated look up tables (LUT)

- integrated digital reduction of fix pattern noise (FPN)
- integrated shading correction

- camera configuration with GUI software Windows OS
- API for Windows operating system

- USB 2.0 Interface
- dimensions USB 2.0 camera: 46 x 46 x 49 mm³ (W x H x D)
- lens mount: C-Mount (option CS-Mount)


Applications
- Standard vision applications
- Quality control
- Process control
- Packaging inspection
- PCB inspection
- Laser welding and soldering
- Keyhole analysis
- Laser profile measurements
- Laser triangulation
- Motion analysis
- Line scan applications

 

 

Compact solution for application-specific systems

- monochrome 1" CMOS image sensor
- 1024 x 1024 pixel (megapixel resolution)
- pixel size: 10.6 µm x 10.6 µm
- spectral range: 350 - 1000 nm

- up to 75 frames per second (fps) with full resolution
- ultra low trigger delay and trigger jitter
- advanced trigger modes

- linear sensor characteristics
- LinLog® response curve (linear-logarithmic sensor characteristics)
- camera simulator for the LinLog® response curve
- 120 dB dynamic range with LinLog®-technology
- Skimming for low light conditions

- no motion artefacts due to global shutter
- no image lag, no smear and no blooming
- configurable region of interest (ROI)
- up to 16 selectable windows (Multiple Region of Interest-MROI)
- frame rate inverse proportional to ROI
- image preprocessing with integrated look up tables (LUT)

- integrated digital reduction of fix pattern noise (FPN)
- integrated shading correction

- camera configuration with GUI software Windows OS
- API for Windows operating system
- SDK for QNX realtime operating system

- CameraLink® base interface
- frame grabber support for many manufactors
- dimensions CameraLink® camera: 46 x 46 x 45 mm³ (W x H x D)
- lens mount: C-Mount (option CS-Mount)


Applications
- Standard vision applications
- Quality control
- Process control
- Packaging inspection
- PCB inspection
- Laser welding and soldering
- Keyhole analysis
- Laser profile measurements
- Laser triangulation
- Motion analysis
- Line scan applications

 

 

Compact solution for application-specific systems

- monochrome 1" CMOS image sensor
- 1024 x 1024 pixel (megapixel resolution)
- pixel size: 10.6 µm x 10.6 µm
- spectral range: 350 - 1000 nm

- up to 150 frames per second (fps) with full resolution
- ultra low trigger delay and trigger jitter
- advanced trigger modes

- linear sensor characteristics
- LinLog® response curve (linear-logarithmic sensor characteristics)
- camera simulator for the LinLog® response curve
- 120 dB dynamic range with LinLog®-technology
- Skimming for low light conditions

- no motion artefacts due to global shutter
- no image lag, no smear and no blooming
- configurable region of interest (ROI)
- up to 16 selectable windows (Multiple Region of Interest-MROI)
- frame rate inverse proportional to ROI
- image preprocessing with integrated look up tables (LUT)

- integrated digital reduction of fix pattern noise (FPN)
- integrated shading correction

- camera configuration with GUI software Windows OS
- API for Windows operating system
- SDK for QNX realtime operating system

- CameraLink® base interface
- frame grabber support for many manufactors
- dimensions CameraLink® camera: 46 x 46 x 45 mm³ (W x H x D)
- lens mount: C-Mount (option CS-Mount)


Applications
- Standard vision applications
- Quality control
- Process control
- Packaging inspection
- PCB inspection
- Laser welding and soldering
- Keyhole analysis
- Laser profile measurements
- Laser triangulation
- Motion analysis
- Line scan applications

 

 

Compact solution for application-specific systems

- monochrome 2/3" CMOS image sensor
- 752 x 582 pixel (CCIR resolution)
- pixel size: 10.6 µm x 10.6 µm
- spectral range: 350 - 1000 nm

- up to 87 frames per second (fps) with full resolution
- ultra low trigger delay and trigger jitter
- advanced trigger modes

- linear sensor characteristics
- LinLog® response curve (linear-logarithmic sensor characteristics)
- camera simulator for the LinLog® response curve
- 120 dB dynamic range with LinLog®-technology
- Skimming for low light conditions
- no motion artefacts due to global shutter
- no image lag, no smear and no blooming
- configurable region of interest (ROI)
- up to 16 selectable windows (Multiple Region of Interest-MROI)
- frame rate inverse proportional to ROI
- image preprocessing with look up tables (LUT)

- integrated digital reduction of fix pattern noise (FPN)
- integrated shading correction

- camera configuration with GUI software Windows OS
- API for Windows operating system
- SDK for QNX realtime operating system

- CameraLink® base interface
- frame grabber support for many manufactors
- dimensions CameraLink® camera: 46 x 46 x 39 mm³ (W x H x D)
- lens mount: C-Mount (option CS-Mount)


Applications
- Standard vision applications
- Quality control
- Process control
- Packaging inspection
- PCB inspection
- Laser welding and soldering
- Keyhole analysis
- Laser profile measurements
- Laser triangulation
- Motion analysis
- Line scan applications
 

Compact solution for application-specific systems

- monochrome 2/3" CMOS image sensor
- 752 x 582 pixel (CCIR resolution)
- pixel size: 10.6 µm x 10.6 µm
- spectral range: 350 - 1000 nm

- up to 87 frames per second (fps) with full resolution
- ultra low trigger delay and trigger jitter
- advanced trigger modes

- linear sensor characteristics
- LinLog® response curve (linear-logarithmic sensor characteristics)
- camera simulator for the LinLog® response curve
- 120 dB dynamic range with LinLog®-technology
- Skimming for low light conditions
- no motion artefacts due to global shutter
- no image lag, no smear and no blooming
- configurable region of interest (ROI)
- up to 16 selectable windows (Multiple Region of Interest-MROI)
- frame rate inverse proportional to ROI
- image preprocessing with look up tables (LUT)

- integrated digital reduction of fix pattern noise (FPN)
- integrated shading correction

- camera configuration with GUI software Windows OS
- API for Windows operating system

- USB 2.0 Interface
- dimensions USB 2.0 camera: 46 x 46 x 49 mm³ (W x H x D)
- lens mount: C-Mount (option CS-Mount)


Applications
- Standard vision applications
- Quality control
- Process control
- Packaging inspection
- PCB inspection
- Laser welding and soldering
- Keyhole analysis
- Laser profile measurements
- Laser triangulation
- Motion analysis
- Line scan applications